Hawk Creation 7A BLHeli ESC For Nano CP X

BLHeli ESC firmware for Governor Function!!

****These 7A using XP-7A BLHeli Hex Code****

& Here

*****Relate Topic On HeliFreak*****

Credit:

BLHeli is free software courtesy Steffen Skaug. Here's a link of his BLHeli Topic.

BLHeliSetup tool is free software courtesy of 4712 on HeliFreak

Credit:

BLHeli is free software courtesy Steffen Skaug. Here's a link of his BLHeli Topic.

BLHeliSetup tool is free software courtesy of 4712 on HeliFreak

You don't need to soldering anythings! The most user friendly BLHeli ESC for Nano CP X2

Fully Linear Thro PNP with Nano CP X

Specifications

• Input voltage: 3.3~4.2v (1S Lipo)

• Continue current: 7A

• Size: 18L X 12.5W X 3.8H mm (net ESC size)

• Weight: 2.02g (with plug & wrap), 1g (net ESS)

Instruction:

Please see the additional photos,
Connector A > to 1S Lipo battery
Connector B > to 3 in 1 Gyro board battery connector
Connector C > to Hawk-Stick when you need to flash newest BLHeli Firmware
Connector D > to 3 in 1 Gyro board main motor output "+"

********************

Content:

1*ESC, 1*Double Sided Tape

********************

Pitch curve use stock setting,
Throttle curve :
Normal: 0/65/65/65/65

Idle1: 75/75/75/75/75

Idle2: 80/80/80/80/80

*****Only ESC in these listing, HawkStick not including.*****

Option Accessory: Hawk-Stick V2, Micro Size Heatsink (Addition Photo)

Suggest Motor: Hawk-HP03SE+7T

Flashing with Hawk-Stick tutorial video