Hawk Creation BLHeli Dual ESC(10A+3.5A) For mCP X
BLHeli ESC firmware for Governor Function!!
****These 10A using XP-7A BLHeli Hex Code, Tail using Super Micro 3.5A Tail Hex Code****
*****Relate Topic On HeliFreak*****
BLHeliSetup tool is free software courtesy of 4712 on HeliFreak
You don't need to soldering anythings! The most user friendly BLHeli ESC for mCP X/V2
Fully Linear Thro PNP with mCP X V2 3n1 Gyro Board(V1.3, V1.5)
Will require MCU direct signal on V1 3n1(V1.1) to get Fully Linear Thro(50% if connect to main motor "+")
Specifications
********************
Content:
1*ESC, 1*tail motor 3pin male plug, 1* Double Sided Tape, 1*adapter to connect HawkStick
********************
Instruction:
Please see the additional photos,
Connector A > to 1S Lipo battery
Connector B > to 3 in 1 Gyro board battery connector
Connector C & D > to Hawk-Stick when you need to flash newest BLHeli Firmware
Connector E > to 3 in 1 Gyro board main motor output "+"
Connector F > to 3 in 1 Gyro board tail motor output "+"
********************
Pitch curve use stock setting,
Throttle curve :
Normal: 0/65/65/65/65
Idle1: 75/75/75/75/75
Idle2: 80/80/80/80/80
*****300mAh can't give you more than 2mins if your are flying under governor mode*****
*****Only ESC in these listing, HawkStick not including.*****
Option Accessory: Hawk-Stick, Micro Size Heatsink (Addition Photo)
Suggest Motor & Lipo: Hawk-HP05S+9T, Hawk-HP06S V2, Hawk Power 550mAh 30C
*****All Item's marked weight are including packing material.******
Hawk Creation BLHeli Dual ESC(10A+3.5A) For mCP X
- Brand: Hawk Creation
- Product Code: HC-BLHELI-D103
- Availability: Out Of Stock
-
$41.99
Tags: HC-BLHELI-D103