Welcome visitor you can login or create an account.

Hawk Creation 10A ESC V3 (BLHeli) For mCP X/V2

BLHeli ESC firmware for Governor Function!!

****These 10A using XP-7A BLHeli Hex Code****

*****BLHeli Software*****

& Here

*****Relate Topic On HeliFreak*****

Credit:
BLHeli is free software courtesy Steffen Skaug. Here's a link of his BLHeli Topic.

BLHeliSetup tool is free software courtesy of 4712 on HeliFreak

Credit:
 
BLHeli is free software courtesy Steffen Skaug. Here's a link of his BLHeli Topic.
BLHeliSetup tool is free software courtesy of 4712 on HeliFreak

 

You don't need to soldering anythings! The most user friendly BLHeli ESC for mCP X/V2

Fully Linear Thro PNP with mCP X V2 3n1 Gyro Board(V1.3, V1.5)

Will require MCU direct signal on V1 3n1(V1.1) to get Fully Linear Thro(50% if connect to main motor "+")

Specifications

• Input voltage: 3.3~4.2V (1S Lipo)
• Continue current: 10A
• Size: 21.2L X 12.6W X 5.8H mm (net ESC size)
• Weight: 2.85g (with plug & wrap)

********************

Content:

1*ESC, 1*Double Sided Tape, 1*adapter to connect HawkStick,

********************

Pitch curve use stock setting,
Throttle curve :
Normal: 0/65/65/65/65

Idle1: 75/75/75/75/75

Idle2: 80/80/80/80/80


Flying Hard 3D with Hawk Power 550mAh 30C at 3:40 at 3.8v

*****300mAh can't give you more than 2mins if your are flying under governor mode*****

*****Only ESC in these listing, HawkStick not including.*****

Option Accessory: Hawk-Stick V2, Micro Size Heatsink (Addition Photo)

Suggest Motor & Lipo: Hawk-HP05S+9T, Hawk-HP06S V2, Hawk Power 550mAh 30C

*****All Item's marked weight are including packing material.******

Flashing with Hawk-Stick tutorial video

Write a review

Please login or register to review

Hawk Creation 10A ESC V3 (BLHeli) For mCP X/V2

  • Brand: Hawk Creation
  • Product Code: HC-081
  • Availability: In Stock

  • $29.99


0 reviews / Write a review

Tags: HC-081